810mm 0.6m/S Ductless Walk In Fume Hood With UV Lamp

ISO9001/14001 Certified China FH(W) Series Walk-in Fume Hood/Fume Cupboard with UV Lamp

Characteristics

1. Eliminates harmful fumes and particles in any science lab.

2. Ductless design means it doesn't require installation.

3. Features low air flow alarm and built-in lighting to illuminate work surface.

Fume Hood Description

1. Changhai Ductless Fume Hood eliminates harmful fumes and particles in your science lab.

2. The ductless design means these fume hood doesn't require installation – simply place the compact unit on a tabletop, cart or over a sink and plug it into an electrical outlet.

3. This affordable fume hoods operates quietly and re-circulates filtered air back into your lab, ensuring energy efficient operation.

4. Filter is easy to install, and epoxy-coated steel is easy to clean. Opt for one of three filters or a spill tray.

Proper Work Practices

The level of protection provided by a fume hood is affected by the manner in which the fume hood is used. No fume hood, however well designed, can provide adequate containment unless good laboratory practices are used, as follows:

1.Check the hood survey sticker to ensure that the hood has been certified within the last year.

2.Check the hood flow indicator and compare its reading to the reading indicated on the hood survey sticker. If the reading differs significantly from that on the sticker, the hood may not be operating properly.

3.Before use, open the fume hood sash and allow the hood to run for at least five minutes in order to reach an appropriate flow rate.

4.Mark a line with tape 6 inches behind the sash and keep all chemicals and equipment behind that line during experiments. This will help to keep materials from escaping the hood when disturbances like air currents from people walking past the hood interfere with airflow at the face of the hood.

5.Keep the sash at the level of the MAXIMUM SAFE SASH HEIGHT sticker (usually 18 inches) any time an experiment is in progress.

6.Keep the sash completely lowered any time an experiment is in progress AND the hood is unattended.

7.Extend only hands and arms into the hood and avoid leaning against it.

8.Do not block baffle slots. If large equipment must be placed in the hood, put it on blocks to raise it approximately 2 inches above the surface so that air may pass beneath it.

9.Do not use the hood as a storage device. Keep only the materials necessary for the experiment inside of the hood. If chemicals must be stored in the hood for a period of time, install shelves on the sides of the hood, away from the baffles.

10.The fume hood alarm will sound when the flow rate dips to unsafe levels. This can happen when the sash is lifted above the maximum safe sash height. Instead of silencing the alarm, try lowering the sash. If the alarm sounds when the sash is at a safe level, contact EHS.

11.Emergency Purge button

Why choose us?
1. Factory visit availble!
2.QC before shipping availble!
3. Professional advice to help you purchase the products you wanted
4.Professional export service team servers in the deal
5.The success of our cooperation can be guaranteed for our company is a credible and honest partner.
6.Customization service is available ,OEM business is appreciated
7.Directly manufacturing factory with competitive price and quality control,we check all material when we start to bulk product productions.
8.Changhai Lab has 8 years’ experience in lab furniture and engineering, we have our own factory , equipped with advanced machine, we can offer high quality products at reasonable factory price without the middle cost.We have been working with many colleges and universities, local governments and research institutions.

Q&A
Q1: Are You Manufactory or Trade Company?
We are the 100% Manufactory specialized in steel furniture over 15 years with 10,000 square meters workshop area and showroom. We have an excellent and experienced team.

Q2: Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings.

Q3: Can We Have Our Logo or Company Information on Your Products or Package?
Sure. Your Logo can show on the products and package.

Q4: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Picture of Walk-in Fume Hood 

Craft

Qualification

Package

If you are interested in our products or want to learn more informations, feel free to contact me (whatsapp: +8613533186787) please , I will be happy to service you!