13mm thick gray Phenolic Resin steel and wood structure dental laboratory bench
Laboratory benches are of major significance. The consequent separation of services supply and furniture creates flexibility in the laboratory. All variants of our benches can be selected with various worktop materials for a large number of application possibilities everywhere in the laboratory. High stability, straightforward design and perfect appearance characterise our laboratory benches.
Suspended System
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.
Clear access for floor cleaning / Worktop supported by steel frame / Under-bench units can be repositioned
The H-frame
provides a high level of stability for add-on tables, mobile tables and analysis tables for working sitting or standing.
Intended use
Bench frame with worktop made of various materials as a work surface and storage area for laboratory work
Supporting construction for analytical equipment and superstructures
Not suitable for laboratory work where hazardous substances must be extracted
Worktop widths are from 600mm to 750mm for wall benches and from 750mm to 1500mm for island benches, however any widths required can be catered for. Worktops are standard 850mm high in laboratories, and 750mm high for write up benches, however other heights are also available.
All the above can be mixed to suit the needs of each individual laboratory.
Steel and wood structure lab bench
| Worktops |
13 thickness of gray Phenolic Resin |
| Structure |
40*60*1.5mm H frame (Suspended System) |
| Cabinet |
18mm thick MDF (be suspended from horizontal rails beneath the worktop) |
| Handle |
C type stainless steel handle |
| Hinge |
DTC 105 degree high quality hinge |
| Slideway |
Self-closing three section slide rail, no noise |
| Gas fitting |
solid brass with high gloss epoxy coating |
| Sockets |
Aluminum alloy box with electric sokcet |
| PP sink + Faucet |
High grade PP sink with three way cold water facucet (304 SUS body with ceramic valve core) |
| Shelves |
Steel storage shelves - 1000*450*2000 |
| Drying rack |
PP boards and PP peg with tray hole for water drainage |
| Emergency eyewash |
Floor mounted emergency eyewash and shower, all 304 stainless steel structure |
| Eyewash |
Solid brass with high gloss epoxy power, PP dust cap and max working pressure 7 bar, min working pressure 2 bar |
| universal exhaust hood |
PP universal exhaust hood |
| Installation |
Very convenient, we provide installation drawings |
Work Surfaces
PHENOLIC RESIN
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical stain and corrosion. Non-porous and non-conductive, it’s strong durable qualities enable it to withstand high impact and shock. It is easily cleaned with soap and warm water.
EPOXY RESIN
Because of the natural resistance to corrosion, the industry has found it superior to any other top material for laboratory work. It is resistant to most organic and inorganic chemicals and is non-toxic. In addition, it is resistant to mechanical and thermal shock.
STAINLESS STEEL
Work surfaces are designed for extra heavy chemical and physical use. Outstanding heat and chemical resistance is its main characteristic.
PLASTIC LAMINATE
Thick decorative and durable laminates are available in an array of colors, shapes and sizes to support your laboratory needs when the resistant qualities of resin or steel surfaces are not needed.
Picture of Product
If you are interested in our products or want to learn more informations, feel free to contact me please,I will be happy to service you!
Your message must be between 20-3,000 characters!
